How to renovate metal fireplace/surround/mantel? - how to build fireplace surround
Original fireplaces built of metal in the room, the house around 1902, it has dozens of layers of different types of paint on them. What are the best ways and products that these fires in their original condition?
How To Build Fireplace Surround How To Renovate Metal Fireplace/surround/mantel?
3 comments:
If you can not get out of the wall (sometimes with only a few screws attached) are the easiest way would be triggered after the explosion. Check your local Yellow Pages Blasters project.
Otherwise, use a brush to paint as Nitromors tripper. Powerful stuff, so protective films on the floor, rubber gloves and well ventilated. If there are layers and layers of color, repeated dosage is required and can be long and confusing.
If you can not get out of the wall (sometimes with only a few screws attached) are the easiest way would be triggered after the explosion. Check your local Yellow Pages Blasters project.
Otherwise, use a brush to paint as Nitromors tripper. Powerful stuff, so protective films on the floor, rubber gloves and well ventilated. If there are layers and layers of color, repeated dosage is required and can be long and confusing.
Brush on paint remover are cheap and very effective and will go into all the nooks and crannies
Post a Comment